Open STaad :Group
How to get group names, list of members and nodes inside the group in open staad ? There is function is to create group but there is no function for getting group list and its properies?
View ArticleStaad.Pro Fire Design
Hello, I was wondering if it is possible to conduct a fire design check on Staad.Pro. Can you please give directions of hoe this can be approached.
View ArticleRAM concept PT slab design strips. Code slab vs full width
Hello Support team,I have just started using RAM concept.I design my PT slab to Eurocode 2If choose 'code slab' columns strip width calculation method, the design of the slab will be based on TR 43...
View ArticleClik here to view.
Instability warning MZ
I have a STAADPro space model with shaft member connected to one corner of a solid element. The connection node is JOINT 2458. I have applied a time load on that node. I am getting an instability...
View ArticleRam Elements Tilt Up Module. Kb factor
Kb factor calculated by RAM Elements significantly different when compared to example B.1 in ACI 551.2-15 Design Guide for Tilt Up Concrete Panels. RAM Elements calculates Kb = 1011.35 kip for LC =...
View ArticleRAM Frmae Member Code Check Output Report
I am working on designing some moment frame connections for a building that I did not do the initial design for. The EOR sent over the Member Code Check outputs, but I am not sure if this has the...
View ArticleSTAAD.Pro CONNECT - Backwards Compatibility with Previous Versions
Hello,I couldn't find this in the release notes or in the forum, but I just wanted to ask a couple of questions regarding backwards compatibility with STAAD.Pro CONNECT:Are STAAD.Pro CONNECT versions...
View ArticleClik here to view.
Steel design code check
Hello everyone,I want to know after I run the analysis for steel design code check I got these sections in the analysis window in the picture showing steel sections with a questions mark. what it is...
View ArticleRam Elements Concrete Pan Joist, Waffle Slab
Can I use a Leo in Ram Elements to model a concrete pan joist or at least a trapezoidal shape to model a concrete joist?Next, is there a way to model a 2-way waffle slab with discrete members and area...
View ArticleCenter of rigidity and center of mass in staad
When using staad is there a way to determine the center of rigidity and center of mass locations for each floor? I know the program does this if you specify a rigid diaphragm but what if you model a...
View ArticleSteel design
what is the purpose having steel design tab in staad pro since all designing works can be done in modelling and then using post processing using commands????
View ArticleDynamic Analsyis - Direction of Loading
When running a dynamic analysis in STAAD, does it matter what direction the seismic load is in? I have two load cases for seismic in the positive and negative X-direction (same direction factors but...
View ArticleEXTREME SOFT STORY DETECTED
Hi all, could you help me to fixed the issue of soft story detected on my staad project thanks.communities.bentley.com/.../Villaverde-Project.std
View ArticleNeed a comprehensive List of Vibration-Diagnostic Rules.
I am a Software developer. Recently, I got a big project where I need to develop a Vibration Analysis Software for condition monitoring of some heavy motors. One of the "Terms & Conditions" of the...
View ArticleWhere can I find a Ram Connection user's manual in English?
I'm trying to find a copy of the user manual for ram connection for use within STAAD. I have the STAAD user manual, but it doesn't mention ram connection.I created a small frame in staad and when...
View ArticleStaad Cloud Analysis
Can anyone give me some new information about using the Cloud Scenario services for analyzing a large plate file in staad?
View ArticleIn STAAD Pro CONNECT Edition, is it possible to connect a beam to the face of...
I am trying to model a temporary traffic barrier with concrete blocks supporting a steel fence and having trouble with disjointedness in the model because it has treated each concrete solid as a...
View ArticlePlate loads and floor loads
what is the difference between plate loads and floor loads on slab designing in staadpro. why peoples used plate loads on slabs?
View ArticleClik here to view.
Getting error in taperd section design
communities.bentley.com/.../NEW-MODEL01062019.STD
View Article